Skip to content

PRODUCTION LEAD TIMESStock 2 weeks min//Custom 6 weeks min//Canopies 6 weeks min

Support documents

EVO / EVO2 · TECHNICAL GUIDE

Cutaway Cable Setup

The Firebird EVO comes with the yellow Lolon cutaway cables uncut. Follow the setup sequence below to size the RSL and non-RSL sides.

All EVO containers

01

Before Cutting

To size the cables correctly, make sure the risers are attached to the EVO’s 3-ring system before cutting.

02

First: The RSL Side

Put tension on the riser and push the Lolon cable all the way in toward the handle to account for the stretch of the housing.

Cut the cable at the height of the apex of the riser safety housing.

RSL side · push the Lolon cable all the way in. Cut at the apex of the riser safety housing, as marked in the diagram.

03

Then: The Non-RSL Side

Cut this cable side 2.5 cm (1”) shorter, below the housing apex line.

Non-RSL side · cut 2.5 cm (1”) shorter, below the housing apex line.